|
Mine Shafts of Michigan - - -INDEX
Mining History: Mine Shafts of Michigan Part 4
Mine shafts in Michigan varied in depth from about 100 feet to over 3,000 feet for iron mines, the shafts usually being vertical. Copper Mines were often deeper, with some shafts being over a mile deep vertically. Most of the deep copper mine shafts were at an angle, ranging between 28 to 73 degrees in angle of descent, so the depth at the bottom of an inclined shaft may have been 9600' with the depth below the surface being less.
In the future we may be able to expand our Mining History site with more detailed information of Mine history. Every mine shaft has a story to tell.
This is a gallery of photos from the Michigan Technological University Mining Engineering Department Collection. There are many more mine, shaft and underground photos, the photos presented here are a sampling and may change from time to time.
Note that we are still trying to identify some of these Mine Shaft Photos.
They were in a set labeled as 1921 field trips to
"Brier Hill, Curry, Vulcan, Newport, Pabst, Ironton, Bengal, Chapin, Yale Mines"
|
IRON MINES
Click on the snapshot for a full size view.

Shaft and builings,
Gogebic Range
from snapshot |

Vulcan Mine
scene near
Vulcan, MI |

Looking east from
Woodbury shaft of the
Newport Mine, Ironwood, MI |

Mine Shaft |

Mine Shaft |

Mine Shaft |

Mine Shaft |

Mine Shaft |

Mine Shaft |

Plymouth Mine
Surface mine
Wakefield, MI |

Plymouth Mine
Surface mine
Wakefield, MI |

Plymouth Mine
Surface mine
Wakefield, MI |
MORE PHOTOS: Mixed Mine Shaft and Underground photos from small brownie camera snapshots taken by Michigan School of Mines professors on student field trips during the hey-day of underground iron mining in 1920s.

Mine Shaft, Upper Peninsula |

Mine Shaft,
Upper Peninsula |

Mine Shaft, Upper Peninsula |

Mine Shaft, Upper Peninsula |

Mine Shaft, Upper Peninsula |

View of Pabst and Newport Mines
Ironwood, MI |

Plymouth Mine,
Three locomotives and shovel
Wakefield, MI |

Volunteer Mine Pit
showing a big blast
Palmer, MI |

Geneva Mine
Ironwood, MI |

Looking NE Palms Hill,
Showing Eureka #3 and #4
Gogebic Range |

Eureka #3
Gogebic Range |
|
Rocks, minerals and gems from these mines:
A.E. Seaman Mineral Museum
Michigan's Official State Mineral Museum
Interested in Mining History: Look at the Web Sites------
Mining History Links
MICHIGAN MINE SHAFT STRUCTURES:
|
Michigan Mineral Ranges
Introduction |
Marquette Mineral Range
Part 1 |
Menominee Mineral Range
Part 2 |
Gogebic Mineral Range
Part 3 |
Copper Country Mine Shaft Structures: Quincy Mine
Part 5 |
Keweenaw Copper Mine Shafts & Structures
Part 6 |
More Iron Mine Shaft Structures
Part 7 |
Iron Mines (MTU Library
Copper Country Archives)
Part 8 |
Copper Mines (MTU Library
Copper Country Archives)
Part 9 |
Return to Mining Engineering at Michigan Tech History Page
Note:
The Michigan Mine Shafts section Web pages are produced by volunteer help from persons interested in Michigan Mining History and Michigan Tech Geological and Mining Engineering and Sciences Department history.
Comments about Mine Shafts of Michigan
or Michigan Mining History:
Send comments to ehgroth@mtu.edu
MINING SHAFTS OF MICHIGAN
MINING HISTORY PAGES
Geological and Mining Engineering and Sciences Department
A.E. Seaman Mineral Museum
The sale or commercial use of Illustrations, photographs and graphic
images presented on this site is not permitted.
Copyright 2015
Department of Mining Engineering
Michigan Technological University
Michigan Technological University is an equal opportunity
educational institution/equal opportunity employer.
|
|